The interferential stimulator (IF) device is a battery operated device that includes two controllable output channels. Amplitude, mode and duration of the electrical impulses can be altered with the buttons or knobs. The controls are protected by a cover in order to prevent accidental changes to the settings. Slide the cover down to make adjustments to the controls.
| Channel | Dual, isolated between channels |
| Pulse Amplitude | Adjustable 0-60mA peak into 500 ohm load each channel, constant current. |
| Carrier Frequency | 4000Hz, Fixed (Ch1) |
| Interference Pulse Frequency | 4-160 bps, Adjustable, 4 bps/step |
| Sweep Time | 15 seconds |
| Timer | 15, 30 minute selectable |
| Pulse Duration | 125 µs maximum |
| LCD | Displays mode, bps rate, abrupt/ramp, timer, and channels |
| Waveform | Symmetrical Balanced Sine Wave |
| IF Frequency Modes | 9 modes, 1 constant mode, 5 frequency shift modes, 3 auto sweep Modes |
| Auto Sweep | 4-45 bps | 80-145 bps | 4-SET bps |
| Frequency Shift | Five modes | 1/1 abrupt shift | 6/6 abrupt shift | 6/6 ramped | 10/10 abrupt shift | 10/10 ramped | bps adjustable |
| Size | 107(L) × 62(W) × 27(H) mm |
No other specifications available.
No accessories listed.
Fill the form and our team will contact you shortly.